ZOOMRY
ZOOMRY solid woven Conveyor Belts are constructed from a single integrated fabric layer woven from high-tenacity polyester and nylon fibers. This unique solid woven carcass eliminates the risk of delamination — a common failure mode in multi-layer rubber belts — ensuring longer service life, higher reliability, and consistent performance in the most challenging environments. Available in PVC (Polyvinyl Chloride) and PVG (PVC with rubber cover) constructions, ZOOMRY solid woven belts are the mandatory choice for underground coal mining and any application where fire safety is non-negotiable.
Where Are Solid Woven Conveyor Belts Used?
Solid woven belts are the mandatory standard for underground mining and are widely deployed across industries where fire safety, durability, and reliable performance are critical:
- Underground Coal Mining: Flame-retardant and anti-static properties compliant with ISO 340 and ISO 284 make solid woven belts the mandatory choice for longwall face conveyors, gate road conveyors, and main slope conveyors in methane-prone environments.
- Tunneling & Excavation: Reliable material transport in confined spaces with demanding conditions where ventilation is limited and fire risk must be minimized.
- Power Plants: Conveying coal and combustible bulk materials with high efficiency and built-in fire protection.
- Ports & Terminals: Durable and flexible for coal export terminals and bulk material handling where safety compliance is mandatory.
- Cement & Aggregate Plants: Abrasion-resistant PVG covers for handling sharp and coarse materials with extended service intervals.
Key Features & Benefits
Flame Retardant & Anti-Static — Built for Underground Safety
Our PVC and PVG conveyor belts offer excellent fire and anti-static capabilities, fully compliant with ISO 340 (flame retardancy) and ISO 284 (antistatic performance). These safety certifications make solid woven belts the mandatory choice for underground coal mines where methane gas and combustible dust create explosive atmospheres. Unlike standard fabric conveyor belts, solid woven belts will not propagate flame and dissipate static electricity safely to ground.
Solid Woven Carcass — Zero Delamination
The solid woven carcass is manufactured from high-quality polyester and nylon fibers woven into a single integrated layer. Unlike multi-ply belts where rubber layers can separate under cyclic loading, the solid woven structure completely eliminates inter-layer delamination — the leading cause of premature belt failure in heavy-duty applications. The result is superior impact resistance, tear strength, and flexibility throughout the belt's entire service life.
Superior Durability & Wear Resistance
The PVG cover layer offers enhanced abrasion resistance and flexibility, reducing wear while increasing plasticity, moisture resistance, and elongation. Available in cover grades from 8MPA to 26MPA, ZOOMRY solid woven belts can be matched to the abrasiveness of your specific material — from soft coal to sharp, coarse aggregates.
High Tensile Strength & Load Capacity
Available in tensile strengths from EP315/3 to EP1250/5, our solid woven belts can handle heavy loads and long-distance transportation with ease. The high strength-to-weight ratio reduces drive system energy consumption compared to heavier steel cord belts in moderate-distance applications.
Flexible Troughed Performance
The belt's flexible construction allows it to conform seamlessly to standard idler troughing angles, ensuring smooth material containment and minimal spillage even at high belt speeds.
Technical Specifications
| Cover Rubber Grade | 8MPA, 10MPA, 12MPA, 15MPA, 18MPA, 20MPA, 24MPA, 26MPA |
| Cover Rubber Standard | DIN-X, Y, W / RMA-1, RMA-2 |
| Belt Width (mm) | 300, 400, 500, 600, 650, 700, 800, 1000, 1200, 1400, 1500, 1800, 2000, 2200, 2500 |
| Belt Width (inch) | 18", 20", 24", 30", 36", 40", 42", 48", 60", 72", 78", 86", 94" |
| Tensile Strength | EP315/3, EP400/3, EP500/3, EP600/3, EP400/4, EP500/4, EP600/4, EP500/5, EP1000/5, EP1250/5, EP600/6, EP1200/6 |
| Top + Bottom Thickness (mm) | 3+1.5, 4+2, 4+1.5, 4+3, 5+1.5 |
| Top + Bottom Thickness (inch) | 3/16" + 1/16", 1/4" + 1/16" |
| Total Belt Thickness | 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 12mm, 15mm, 20mm, 25mm |
| Belt Length | 10m, 20m, 50m, 100m, 200m, 250m, 300m, 500m (Custom lengths available) |
| Belt Edge Type | Moulded (sealed) edge or cut edge |
Advantages
- Safety First: PVC/PVG conveyor belt has excellent fire and anti-static capabilities, compliant with ISO 340 and ISO 284 for underground mining safety.
- Reduced Wear: PVG design reduces wear on the cover layer while increasing plasticity, moisture resistance, and elongation of the belt.
- Long Service Life: Solid woven construction eliminates delamination, ensuring consistent performance throughout the belt's operational life.
- Cost-Effective: High strength-to-weight ratio reduces energy consumption and overall operating costs compared to heavier belt types.
- Customizable: Available in various widths, thicknesses, lengths, and rubber grades to meet specific application requirements.
Related Industry Solutions
Need a Custom Solid Woven Conveyor Belt?
Contact ZOOMRY for PVC and PVG solid woven belts engineered to your specific width, tensile strength, and safety requirements — backed by ISO 340 and ISO 284 certified manufacturing.
Contact Us Today
